How to use compression fittings on copper pipes.Sweating pipes the right way: step by step.That article is below in our Related Resources. We have some great instructions on how to solder (or sweat) a copper pipe correctly. You’ve used the flux to clean and connect. This will remove any flux that came off while connecting the pipes. Make sure to wipe away excess plumbing flux with a paintbrush or a rag after you’ve joined the pipes. This should be sufficient to remove dirt and grime without causing damage to the pipes. Clean your pipe fittings with 120-grit sandpaper or grade-1 steel wool.If you’re using a larger pipe fitting, you may need to clean it more thoroughly to ensure that the point of overlap between the pipe and the fitting is ready to solder. You should only have to clean around 1 to 2 inches of piping to make soldering easier.This will allow your solder to adhere to the pipe more tightly, resulting in a more secure connection. Clean any grime or dirt from any sections of your pipes and fittings that need to be soldered with sandpaper, steel wool, or anything abrasive. Make sure the area where you’ll be soldering is clean.Larger areas of oxidation can be removed with acid flux, resulting in much stronger soldering work. How to Apply Plumbing Fluxįor plumbing purposes, you want to use an acid flux or lead-free tinning flux for soldering copper pipes as these are the two best options. It is critical to have a proper connection during soldering in order to avoid future leaks and water damage. This brings the melted alloy with it and forms a watertight seal. What is Flux Melting?įlux is acidic in nature, and it not only cleans the copper pipe, but it also draws the flame to it. For example, in extreme temperatures, professional plumbers might use Climate Smooth, a branded solution that works in freezing cold.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |